How To Make A Harness-Lead For A Decorative Ferret Do It Yourself

How To Make A Harness-Lead For A Decorative Ferret Do It Yourself

Do-it-yourself harness for a ferret

A special leash will make your pet walking calm and enjoyable. The pet will not be able to escape, get lost.

Why do you need a leash ferret

Owners of domestic ferrets know how active these cute animals are. They will climb into any corner, they are all curious, they need to know everything. You can walk with your pet only within the house. But it will soon become boring to both the owner and the beast. Any animal should be in nature, at least a little. How to walk with a rodent on the street? If released, he will feel freedom, will run everywhere, and the owner will have to run after him. You can calmly walk only with a ferret on a leash.

There are special harnesses for ferrets; they do not fasten to the collar. A simple collar will choke the animal, cause discomfort. Sewing a harness for a ferret is easy with your own hands. This does not require large time and financial costs.

The ferret leash should have an average length (less than 2 m).

There are many problems with a long fixture. The pet can run away far, get confused in the bushes. At the end of the product, they make a loop, so that it is easier for the owner to restrain the pet.

Materials for sewing the harness

  • tape made of strong and durable material (tape length – 3-3.5 m, width – 10-15 cm);
  • carbine and half ring (connection of a leash with a base);
  • a couple of fasteks (fasteners that are used in the manufacture of backpacks);
  • regulators.
Read more:  Ferret Swimming

The pattern of the harness is done after measuring the volume of the chest and neck of the pet. The measurement results are transferred to the tape with a seam allowance (2-3 cm). This must be done to ensure the animal proper comfort. Also, an allowance is useful if the animal grows or recovers.

How to make a harness to a domestic ferret

Before you make a harness for a ferret with your own hands, you need to prepare materials, measure the circumference of the neck and chest of the pet. An example of a finished pattern of a harness can be easily found on photos and videos on the Internet.

Instructions on how to make a harness for a ferret:

  1. According to previously made measurements, cut off 2 pieces from the tape (for the neck and for the chest).
  2. Cut the jumper. The length of the tape equals the distance between the neck and the front paws.
  3. To the edges of each segment (for the neck and chest) attach along the regulator and sew on the parts of the fastener.
  4. Hook the carabiner ring onto the jumper.
  5. Sew parts with a jumper.

The leash is even easier to make than the harness base. A carabiner clings from one end of the tape, and a loop for the hand is made from the other. The length of the product should be less than 2 m.

If a synthetic tape is used for sewing the harness, its edges will necessarily be scorched so that the fabric does not crumble in the future. This ensures a long product life.

Read more:  How To Feed A Domestic Ferret Natural Food

If you don’t want to bother and make a harness for a ferret with your own hands, you can spend money on a ready-made accessory, but you must measure the animal before buying.

You may also like...

Pin It on Pinterest

Share This